Kustom Profile 1 - 100W PA System

Full Description

Kustom's Profile System One, a 24-bit digital, portable, and powerful, 100-watt P.A. System, Perfect for indoor venues.

Profile's 100 watts of power and the focused audio dispersion pattern of the Line Array speakers enable the system to reach deeper into the audience - giving your message clarity and attention. You can bet they're going to hear what you have to say.

The more you use your Profile System One, the more you'll appreciate it's comforting, compact size and incredibly big sound.

Acoustic guitarists will love the contoured instrument input, especially when you add a hint of hall reverb into your mix.

Four balanced XLR inputs, with phantom power, allow you to use every type of microphone available, even condenser mics for use with pianos and other hard-to-mic instruments.

Five line level inputs - enough to accommodate every keyboard, drum machine, and sampler you own.

Connect your favourite outboard pedal or rack effect into Profile's effect bus and simultaneously use Profile's digital effects.

Lastly, the integrated, ergonomic carry handles and the compact design of the line array cabinets make stage setup and tear down a breeze. Simply load everything you need into the optional Profile System One roller bag and get to the stage with ease!

Specifications (Mixer/Amplifier System):

Output Power :

100W 4 ohms @ 10% THD

80W 4 ohms @ 0.4% THD

Frequency Response: 20Hz-20kHz Actual response is tailored to speaker cabinet for

accurate acoustical response

Total Harmonic Distortion: less than 0.4% Measured at 1 VRMS (0dBv) at record output,

effects send, or insert output

Hum & Noise: -115dB Mic Input Rs=150 ohm, 20-20kHz

-52dB Residual Noise, all level controls 0% (minimum)

-50dB Nominal System Noise, all level controls at 50%

System Gain: (All measurements made at 1kHz)

77dB Mic to Power Amp Out (Ch 1 - Ch 4)

57dB Line to Power Amp Out (Ch 1 - Ch 5)

53dB Instrument to Power Amp (Ch 5)

32dB Playback to Power Amp

57dB Mic to Record Output

44dB Mic to Effects Send

52dB Mic to Insert Output

25dB Insert Input to Power Amp Output

Crosstalk: 80dB Channel to channel, 1kHz

Input Channel Equalization: Special curve that adjusts bass, mid, and treble frequencies

Master Equalization: 100Hz (Bass), 1kHz (Mid), 10kHz (Treble) all ±12dB

Digital Effects:

24 bit DSP, 8 effects; small room, large room, small hall, large hall,

chorus, chorus reverb, slap back (delay), echo

Phantom Power:

+15V Applied to all Mic Inputs thru 3.3K resistors Footswitch (optional)

Digital effects ON/OFF and Channel ON/OFF (playback remains active)

Power Requirements: UK 230VAC/50Hz, 100W nominal

Dimensions

mm/kg 326 (Height) x 226 (Width) x 270 (Depth), 8.2 kg

inches/pounds 12 7/8 (Height) x 8 7/8 (Width) x 10 5/8 (Depth), 18.0 lbs

Specifications: (KPS-LS100 Profile System One Loudspeaker System)

LF: 6.5" Wide-range cone speaker (2)

HF: Horn Piezo Tweeter, 2" x 6"

Power Capacity:

50W Noise per EIA RS-426

100W Program power (music power)

Frequency Response:

80Hz - 20kHz +/- 3dB when used with KPS-PM100 Amplifier

Crossover Frequency: 5kHz Cone speaker operated full-range

Nominal Impedance: 8 Ohms Accurate acoustical response

Sensitivity: 94dB Measured 1Watt @ 1 meter

Dimensions:

mm/kg 485 (Height) x 226 (Width) x 270 (Depth), 8.2 kg

inches/pounds 19 1/8 (Height) x 8 7/8 (Width) x 10 5/8 (Depth), 18.0 lbs