sE Electronics sE400A + FREE sE Project Studio Reflexion

Full Description

It has 4 polar patterns, Cardioid, Hypercardioid, Figure of 8 and Omni. 2 bass cuts at 60Hz and 120Hz; 2 pads at 10 and 20dB. The chassis is small very small, but still manages to house a twin diaphragm 1" capsule and all the top grade electronics and switches. This flat, round edged chassis design allow the mic to be used flat onto a drumhead or guitar cab, or pushed through into the skin of a kick drum. It is also perfect for sung vocals and voice over work, because although it's the smallest mic of it's type, it still 'looks' big when used full face on. It is extremely thin at less than 3/4" and fits neatly in the palm of your hand.

sE4400a has a unique, black, non-reflective, non-marking, rubberised finish which is ideal for live stage, theatre, TV and broadcast applications which require lighting.

Finally, the capsule has been specially tuned after almost 2 years of pre-market tests with professional studios and broadcasters, to really be something that very few mics can; the true all-rounder. Vital in professional studio or broadcast applications where an engineer needs to know he can reach for a mic that will handle any job, and equally for the home studio user who is on a budget and needs one mic to suit every occasion. The mic is multi-functional yet uncluttered, the sound is smooth and flattering and yet, because the capsules are hand made (like all sE mics) and then individually tuned, it benefits from lacking the usual hyped top end of most modern mass produced mics from automated machines.

It comes with a unique shock mount which allows you to fit the mounted mic into tiny spaces, or invert the shock clamp to extend the mic fully outside the shock mount for close mic-ing applications or vocals. It also comes with a full, steel re-enforced, black aluminium, signature sE flight case.

Features/Specifications:

• Frequency Response: 20Hz-20KHz
• Sensitivity: 14.1mv/pa-37db ± 1dB
• Polar Pattern: Cardioid, Figure 8, Omni, supercardioid
• Impedance: ? 50 Ohms
• Equivalent Noise Level: 17dB(A weighted)
• Max SPL for 0.5 THD@1000Hz: 130dB
• Power Requirement: Phantom power 48V±4V
• Connector: 3-pin

sE Electronics Project Studio Reflexion Filter Vocal Booth

After 3 years and many poor imitations of SE's now industry standard design, they have gone back to the drawing board to produce what many budget concuos customers have so desired... an entry level Reflexion Filter product which actually does the job properly!

Due to patents pending on their original design, competitors who have tried to emulate the success of SE's original RF Pro have not managed to do so succesfuly since their designs are limited, and as a result, so are their performances.

The Project Studio RF uses the same basic design as the Pro version, and while it can never be fully as effective as its more expensive big brother, it easily ouut performs copies and for project studio use is just the job. The metal frame is lined with the same patented polyester fibreboard as the Pro version uses for its outer layer. This material has extremely good acoustic absorbtion properties; much better than simple foam products. This is then further lined with a high density 'crystal' foam with curved undulations rather the cheaper and less effective ribbed, medium density foams that are widely used by other companies.

The result is a product which looks fantastic and 'sounds' even better when recording vocals and acoustic guitars... its not an RF Pro, but it's the best of the rest!