Audio Technica ATM350UcW Instrument Mic w/ Universal Mounting System - Nearly New

Full Description

ATM350acW Cardioid Condenser Microphone

Included in the ATM350UcW package is the ATM350acW cardioid condenser microphone, featuring a fixed-charge design suitable for both live-sound and studio applications. This is the wireless version of the ATM350a, and connects to all Audio Technica UniPack body-pack wireless transmitters via the locking 4-pin connection at the end of its cable. The ATM350acW delivers exceptionally precise and consistent reproduction of a wide range of instrumentation, from brass, to piano, and even drums. The mic is fitted with a flexible UniMount 5'' gooseneck, enabling you to achieve the perfect microphone position, whilst being rigid enough to maintain that position throughout even the most aggressive playing. The cardioid polar pattern of the microphone allows for superior isolation of your desired sound source, and includes a permanently attached 1.4m miniature cable. The microphone is enclosed within a rugged housing featuring a hard-wearing black finish with ultra-low reflectivity. There is no power module included with the ATM350acW, so there is no low-cut/HPF function with this microphone.

UniMount Universal Clip-On Mount

The universal clip-on mount included in this kit is crafted from metal for excellent durability in all applications, and is lined with rubber for excellent shock-resistance, secure mounting, and protection for your instrument. This specially designed mount ensures minimal contact with the instrument, providing excellent isolation when close-miking with no effect on the natural sound of your instrument, whilst a locking screw holds your mount securely in place.

Features

• Low-profile microphone design provides unobtrusive mounting with minimal visibility
• Crisp, clear, and well-balanced microphone response, even at high SPLs
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, providing excellent isolation of your desired sound source
• UniMount universal clip-on mount attaches securely to a variety of instruments whilst providing excellent shock resistance for the microphone
• Rugged UniMount 5'' gooseneck rigidly holds its shape, maintaining accurate microphone positioning, even during aggressive play
• Wireless version of the microphone (ATM350acW) in this kit is equipped with a 1.4m cable with a 4-pin locking connection, suitable for all Audio Technica UniPack body-pack wireless transmitters
• Optional interchangeable elements available for hypercardioid and omnidirectional polar patterns (not included in this kit, must be purchased separately)
• Included violin mount with hook-and-loop fastener for additional mounting options

Specifications

• Microphone Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 40Hz to 20kHz
• Low Frequency Roll-Off: 80Hz, 12dB/Oct
• Open Circuit Sensitivity: -49dB (3.5mV) re 1V at 1Pa
• Impedance: 200 Ohms
• Maximum Input Sound Level: 159dB SPL, 1kHz at 1 percent THD
• Dynamic Range (Typical): 130dB, 1kHz at max. SPL
• Signal-To-Noise Ratio: 65dB, 1kHz at 1Pa
• Phantom Power Requirements: 11 - 52V DC, 3.5mA typical
• Switch: Flat, Roll-Off
• Microphone Weight: 14.5g / 0.5oz.
• Microphone Dimensions:
  • 37.8mm / 1.49'' long
  • 12.2mm / 0.48'' max. body diameter
• Power Module Weight: 90g / 3.2oz.
• Power Module Dimensions:
  • 92mm / 3.62'' long
  • 18.9mm / 0.74'' diameter
• Power Module Output Connector: Integral 3-pin XLRM-type
• Cable: 4.0m / 13.1ft long (permanently attached to microphone, 3.2mm / 0.13'' diameter, 2-conductor shielded cable with HIROSE HR10-type connector
• Optional Interchangeable Elements:
  • UE-H Hypercardioid (Not Included)
  • UE-O Omnidirectional (Not Included)
• Included Accessories:
  • ATM350acW Wireless Cardioid Condenser Microphone
  • AT8491U UniMount Universal Clip-On Mount
  • AT8490 UniMount 5'' Gooseneck
  • AT8468 Violin Mount (Hook-and-Loop Fastener)
  • Protective Carry-Case