Key Features
- 16-Channel analog mixer for running live or studio sound
- Clean, precise GB30 preamps deliver premium sound quality
- Four-band GB30 EQ circuitry provides steeper shelves to cut unwanted frequencies
- Seven buses and six Aux sends for flexible routing and processing
Soundcraft LX7ii-16 16-Channel Mixer Overview
The LX7ii-16 is a flexible 16-channel analog mixer that is easy to use but packed with features. The 16 mono inputs and two stereo channels mix to seven outputs - four subgroups plus the main Left, Right and Centre mono mix outputs.
The LX7ii-16 features direct outputs on the 16 inputs suitable for multitrack recording, and six auxes for flexibility for effects and foldback. It also boasts Soundcraft's GB30 mic preamp, for clear, precise sound. To further sculpt your inputs, this analog mixer's four-band GB30 EQ circuitry provides two sweepable parametric mid bands, and steeper high and low shelving curved to get rid of unwanted frequencies. The LX7ii-16 is suitable for any situation requiring a compact-sized console with a large number of inputs and outputs, both in recording and live applications.
Product Ref: 38524
Full Description
View Full DescriptionFeatures
- 16-channel analog mixer for live sound
- Sixteen mono input channels and two stereo input channels
- Seven outputs consisting of four subgroups, plus Left, Centre, and Right, for flexible PA connectivity
- Clean, low noise GB30 preamps for precise sound
- Four-band GB30 EQ circuitry provides two sweepable mid-frequency bands and steeper shelves
- Six Auxiliary sends for easy routing and processing by other effects units
- Two-track inputs and outputs for playback from external devices
- Twelve-segment LED meter bridge for monitoring volume and preventing clipping
- Group faders provide additional 10 dB of clean gain above zero mark for balanced gain staging
- Talkback section with adjustable volume and assignable to Aux 1 - 4 or main mix output
- Two stereo return tracks receive signal from effects processors or stereo instruments
- Master faders with 100 mm long throw design for smooth operation
- Pre-fader and after-fader listening on master output
- Master meter display pre-fader or after-fader levels when these modes are active
- Lightweight and efficient switch mode power supply operates at cooler temperature for safe use
Specifications
- Stereo Channels: 2
- Fixed Send (Group) Buses: 4
- EQ Bands: 4
- Variable Send (Aux) Buses: 6
- Returns: 4
- Direct Outputs: Yes
- Main Bus Out: LRC
- Noise Measured RMS, 22Hz to 22kHz Bandwidth:
- Mic E.I.N. at unity gain,150W source impedance: -129dBu
- Mix Output, 24 inputs routed to mix, faders at unity, muted: <-80dBu
- Mix Output, 24 inputs routed to mix, faders down: <-100dBu
- Input to Direct output at unity gain: <-90dBu
- Input to Direct output at 40dB gain: <-80dBu
- Crosstalk (at 1kHz, typical):
- Fader attenuation: >95dB
- Aux attenuation: >80dB
- Pan isolation: >75dB
- Adjacent channel crosstalk: >-80dB
- Channel Mute: >90dB
- Fader cut-off (rel. 0 mark): >90dB
- Aux Send pots offness: >80dB
- Frequency Response:
- Mic/Line Input to any output, 20Hz - 20kHz: <1dB
- THD + N Mic sens. -30dBu, +20dBu at all outputs @1kHz: <0.006%
- CMRR:
- Typical at max gain at 1kHz: >80dB
- Typical at any gain at 50Hz: >60dB
- Input & Output Impedance:
- Mic Input: 1.8k Ohms
- Line Input: 10k Ohms
- Stereo Input: 8.6k Ohms
- 2TK Return: 12k Ohms
- Mix, Aux, Direct Outputs, and Insert Sends: 75 Ohms
- Input & Output Levels:
- Mic Input max. level: +22dBu
- Line Input max. level: +22dBu
- Stereo Input max. level: +22dBu
- 2TK Return: >30dBu
- Headphones (at 200 Ohms): 150mW
| Reviews of our service
View all