Yamaha EMX2 500W Powered Mixer - Nearly New

Full Description

Versatile and Powerful

The Yamaha EMX2's flexible connectivity can accommodate up to four microphones for singing along with musical instruments, or speaking/making announcements along with BGM or recorded audio from a portable playback device. The phantom power and high-impedance input capability is suitable for connecting high-performance condenser microphones and guitars directly without any external equipment. Additionally, the 500W output and switchable impedance is suitable for powering passive loudspeaker setups.

Shape Your Sound

The 1-Knob Master EQ™ function is perfect for adding the final touch to your sound, allowing you to apply optimised EQ settings by simply turning a control knob. The SPEECH setting is designed for meetings, seminars and conferences that require clear, defined speech. MUSIC offers a more balanced sound that is perfect for acoustic instruments and band performances, and BASS BOOST is suitable for DJ performances or audio playback that requires deep, rich bass.

Onboard Yamaha Reverbs

The EMX2 powered mixer is equipped with four high-quality reverb effects that were developed by Yamaha's sound specialists. Controlled via a single knob, these effects allow you to add an atmospheric touch to both vocal and instrumental performances. The HALL mimics the sound characteristics of a large concert hall, PLATE produces a more classic and defined sound while ROOM adds a more intimate sound to performances and ECHO gives instruments or vocals a professional edge.

Specifications

• Dimensions:
  • Height: 147 mm
  • Width: 375 mm
  • Depth: 220 mm
• Weight: 4.2 KG
• Mains Power: AC 100-240V 50Hz/60Hz
• Mono Inputs: 4
• Stereo Inputs: 3
• Outputs: Speakers [L, R] Monitor Out [L, R] Subwoofer Out
• Bus: 1 Stereo, 1 Effect
• DSP Processor: SPX Algorithm Reverb 4 Programs, MASTER EQ (Speech to Music), Feedback Suppressor
• Maximum Output Power at 4Ohms: 1kHz THD+N less than 10 (CEA2006): 250 W + 250 W
• Maximum Output Power at 8Ohms: 1kHz THD+N less than 10 (CEA2006) : 170 W + 170 W
• Input Channel Function:
  • Pad: 26 dB (CH1-4)
  • Hi-Z: Supported (CH4)
  • EQ High: 8kHz +15 dB / -15 dB
  • EQ Mid: 2.5kHz +15 dB / -15 dB
  • EQ Low: 100 Hz +15 dB / -15 dB
• Frequency Response:
  • Input to Speakers: +1 dB/-4 dB (40Hz to 20kHz)
  • Input to Monitor Out: +0.5 dB/-1.5 dB (20Hz to 20kHz)
• Total Harmonic Distortion:
  • Input to Speakers: 0.2 at 13.8W (40Hz to 20kHz), 0.4 at 23.2W (1kHz)
  • Input to Monitor Out: 0.05 at +10 dBu (20Hz to 20kHz), 0.009 at +20 dBu (1kHz)
• Equivalent Input Noise: -115 dBu
• Residual Output Noise: Input to Speakers -68 dBu (40Hz to 20kHz) Input to Monitor Out -99 dBu (20Hz to 20kHz)
• Crosstalk: -80 dB (1kHz)
• Load Protection: DC- Fault
• Amplifier Protection: Overheat Protection, Over Current Protection
• Power Consumption: 35W (Idle) / 90W (1/8 Power)